Who Sets Up Dental Imaging and Intraoral Cameras in Toronto?

By Starcomm Technologies ·

In most Toronto dental clinics, dental imaging software and intraoral cameras are set up by two parties working together. The imaging vendor or your dental equipment dealer installs and calibrates the device and its software, and your IT company prepares the computers, network, server and backups the system depends on. When one side assumes the other has a task covered, that is usually where trouble starts, so it helps to know who owns what before installation day.

Who is responsible for what when you add imaging?

Every clinic and vendor is a little different, but the work usually splits like this.

The imaging vendor or dental dealer

The company that sold you the sensor, camera, pano or scanner (for example Dexis, Carestream, Schick, Planmeca, Sidexis, Vatech, iTero or CEREC equipment) normally:

  • Supplies and licenses the imaging software
  • Installs the device and its driver (a small program that lets Windows talk to the hardware)
  • Calibrates the equipment and confirms image quality
  • Trains your team on taking and reviewing images
  • Handles warranty repairs on the device itself

Your IT company

Your IT provider looks after everything around the device:

  • Making sure each operatory computer meets the vendor's requirements
  • Setting up the server or shared folder where images are stored
  • Network connections between operatories, the server and the front desk
  • User accounts, permissions and security software that won't block the imaging program
  • Backups that actually include the image database
  • Windows updates, scheduled so they don't break drivers in the middle of a clinic day

Your practice management software vendor

If you run Dentrix, ABELDent, Tracker, ClearDent, Open Dental or similar, the imaging program usually connects through a bridge, a small link that opens the imaging software on the correct patient when you click a button in the chart. Your practice management vendor, imaging vendor and IT company often all have a hand in getting that bridge working.

What does setting up an intraoral camera actually involve?

An intraoral camera looks simple: plug it in and take pictures. In practice, a clean setup usually includes:

  1. Confirming the operatory PC has a suitable USB port and enough processing power for live video
  2. Installing the correct driver version for both the camera and the current version of Windows
  3. Configuring the capture software so images save to the clinic's server, not just the local computer
  4. Testing the capture button or foot pedal
  5. Linking the camera to the patient chart through the imaging bridge
  6. Checking that the images appear at other workstations, such as the front desk or a consult room

Sensors, panos and 3D scanners follow a similar pattern, with more attention to calibration and to the size of the files being saved.

Why does imaging so often go wrong after the install?

Most imaging problems we see aren't caused by faulty equipment. They come from gaps between the vendor's job and the IT side. Common examples:

  • Images saved to the wrong place. If an operatory saves images to its own hard drive, they may not be backed up, and other rooms can't see them.
  • A Windows update replaced a working driver. The sensor stops responding on a Monday morning.
  • Security software blocked the imaging program. Antivirus or firewall rules sometimes treat imaging software as suspicious until they're adjusted.
  • Older computers. Live camera video and 3D scans can be demanding. Microsoft ended support for Windows 10 on October 14, 2025, so clinics still running it should plan upgrades with their imaging vendor's compatibility list in hand.
  • Weak network links. Large image files moving over an old switch or patchy Wi-Fi can make the imaging program feel slow or freeze.

None of these is hard to prevent, but each one needs someone to own it.

Where are X-rays and intraoral photos stored, and are they backed up?

In most clinics, images live in an imaging database on the office server, or in a vendor's cloud service. Either way, it's worth asking two questions:

  • Does our backup include the imaging database and image folders, not just the practice management data?
  • Have we ever tested restoring an image from backup?

Dental images are personal health information, so they fall under Ontario's privacy rules for health information custodians (PHIPA). In general terms, that means protecting them from loss and unauthorized access. The Information and Privacy Commissioner of Ontario publishes guidance, and your college or a lawyer can confirm what applies to your practice. Our backup and disaster recovery page explains how we approach keeping copies on site and in Canadian cloud storage. No backup setup removes every risk, but regular, tested backups make it much less likely that a failed server costs you years of images.

Is there free dental imaging software?

Some vendors offer free viewers or trial versions, and a few imaging programs are bundled with the hardware. Before relying on one, check with the vendor about licensing, whether it works with your practice management bridge, and whether it stores images in a way your backups can capture. The cheapest software can become expensive if images can't be moved later.

A checklist before installing a new sensor or camera

Use this before booking the vendor's install date:

  1. Get the vendor's written system requirements (Windows version, processor, memory, USB, storage).
  2. Share those requirements with your IT company and confirm each operatory meets them.
  3. Decide where images will be stored, and make sure the server has room to grow.
  4. Confirm which version of the bridge works with your version of Dentrix, ABELDent, Tracker or other software.
  5. Agree who installs drivers, who configures the storage path, and who tests the bridge.
  6. Pause automatic Windows updates on imaging PCs until the install has been tested.
  7. Check that security software allows the imaging program.
  8. After install, take a test image in every operatory and open it from another workstation.
  9. Confirm the next backup includes the new images, then test a restore.
  10. Write down vendor support numbers and licence details where the office can find them.

It's often easiest to have your IT technician on site, or connected remotely, while the vendor is installing. Questions get answered on the spot instead of over a week of phone calls.

What if you're opening a new clinic?

For a new build or a move, imaging should be planned alongside cabling, computers and the server rather than added at the end. Network drops in each operatory, enough power outlets and the right PC specs are much easier to get right before the walls are closed. Our post on choosing an IT company for a new Toronto dental clinic covers the wider planning, and our hardware and implementations page explains operatory PC and server setups.

How Starcomm can help

We've supported dental and healthcare offices in Mississauga, Toronto and across the GTA since 1999, and dental IT is our specialty. We work alongside your imaging vendor and dental dealer to prepare operatory computers, servers, networks and backups for Dexis, Carestream, Schick, Planmeca, Sidexis, Vatech, iTero and CEREC equipment, and to get the bridge to your practice management software working. We can join an install on site across the GTA or connect remotely for clinics elsewhere in Ontario.

Learn more on our dental IT support page, call us at 905-816-9797, or contact us to talk through your next imaging install.

Frequently asked questions

Will my imaging vendor set up my computers too?

Usually not fully. Imaging vendors install their software and device drivers, but most expect your computers, server, network and backups to be ready beforehand, which is typically your IT company's job.

Can an intraoral camera work on an older operatory computer?

Sometimes, but live video can be demanding and older Windows versions may not be supported by current drivers. Check the vendor's compatibility list and have your IT provider confirm each operatory PC before buying.

Should images be saved on each operatory PC or on the server?

In most clinics, images should be saved to a central server or the vendor's cloud so every room can see them and backups can capture them. Images kept only on a local computer are easy to lose if that computer fails.

What should I do if my sensor stops working after a Windows update?

Don't reinstall software at random. Call your IT provider or imaging vendor, since the fix is often reinstalling the correct driver version, and ask them to adjust how updates are scheduled on imaging computers.

Does Starcomm sell imaging equipment?

Our role is the IT side: preparing and supporting the computers, servers, networks and backups your imaging system relies on. We work alongside the imaging vendor or dental dealer you choose.

← All posts