What Dental IT Support Costs in Ontario and What Drives It

By Starcomm Technologies ·

Dental IT support in Ontario is usually priced in one of two ways: by the hour, where you pay only when you call for help, or as managed IT, where you pay a flat monthly fee for ongoing care. What your clinic actually pays depends on its size, its equipment and how much it relies on its server, imaging and practice management software. At Starcomm, hourly support is $120 per technician hour, and managed IT is a flat monthly fee quoted for your specific clinic.

Below we explain how each model works, what makes one clinic cost more than another, and how to compare quotes without getting surprised later.

How is dental IT support usually priced?

Most IT companies that work with dental offices in Mississauga, Toronto and the rest of the GTA use some mix of these three ways of billing.

Hourly, or pay-as-you-go

You call when something breaks or needs changing, and you pay for the time a technician spends on it. Many providers have a minimum charge per visit or per remote session (help given over the internet, without anyone driving to your office).

This suits clinics with few computers, simple setups and staff who rarely need help. The trade-off is that nobody is watching your systems between calls, so problems are usually found when they already affect patients or the schedule.

Managed IT, or a flat monthly fee

With managed IT services, you pay a set amount each month and the provider looks after your systems on an ongoing basis. That normally means monitoring (software that watches your computers and server and raises an alert when something looks wrong), regular updates, backup checks and help when staff call.

The main benefits are a predictable monthly cost and problems that are more likely to be caught early. What the fee covers varies a lot between providers, which is why comparing what is included matters more than comparing the headline number.

Project work

Larger jobs are normally quoted separately, whichever support model you use. Examples include replacing a server, setting up a new operatory, rewiring during a renovation, or moving the clinic to a new address.

What makes one dental office cost more than another?

Two clinics with the same number of chairs can have very different IT costs. The biggest factors are:

  • Number of computers and operatories. Every front desk PC, operatory computer and laptop needs updates, security software and occasional help.
  • Server or cloud. A clinic with its own server (the central computer that holds the practice database and images) needs that server watched, patched and backed up. Cloud-based software shifts some of that work to the software vendor.
  • Imaging equipment. Sensors, intraoral cameras, pan and CBCT units and scanners from makers such as Dexis, Carestream, Schick, Planmeca, Vatech, iTero or CEREC each come with drivers and software that need to work together. More devices usually means more setup and troubleshooting.
  • Practice management software. Dentrix, ABELDent, Tracker, ClearDent, Eaglesoft and others each have their own update routines and quirks. A provider who already knows yours tends to spend less time figuring it out.
  • Age of your equipment. Older computers fail more often and take longer to fix. Microsoft ended support for Windows 10 on October 14, 2025, so clinics still running it face extra work or replacement costs. Our post on how often a dental office should replace computers and servers covers this in more detail.
  • Backup and security needs. Off-site copies of patient data, firewalls (devices that filter traffic coming into your network) and endpoint protection (security software on each computer) add cost, but they also lower the risk of a long outage.
  • Number of locations and distance. Multiple sites, or a clinic far from the provider's office, can mean more travel time for onsite visits.

What does Starcomm charge?

We publish our rates on our pricing page. In short:

  • Hourly support: $120 per technician hour. Remote sessions have a 30-minute minimum and onsite visits have a 2-hour minimum. We are upfront about how travel time is billed.
  • Managed IT: a flat monthly fee, quoted for your clinic based on the factors above. It covers 24/7 monitoring, maintenance and unlimited remote support.
  • Onsite visits for managed clients: these are not part of the monthly fee. They are billed separately at a discounted hourly rate.

One point worth being clear on: the monitoring runs around the clock, but our live support hours are Monday to Friday 8 am to 8 pm and Saturday 10 am to 4 pm, Eastern time. Sundays and after hours are for emergencies only. Details of how remote and onsite help works are on our remote and onsite support page.

What is usually not included in a monthly IT fee?

This is where most surprises come from. Depending on the provider, these are often billed separately:

  • New computers, servers, monitors, printers and network equipment
  • Software licences and subscriptions, such as your practice management software, Microsoft 365 or imaging software, which are often paid directly to the vendor
  • Onsite visits (at Starcomm, managed clients pay for these separately at a discounted rate)
  • Projects such as new operatories, cabling, renovations or office moves
  • Your internet service and phone lines
  • Help from the software vendor's own support team, if your contract with them requires it

None of these are hidden fees in themselves. The key is knowing in advance which ones you will be paying, so the monthly fee is not mistaken for your whole IT budget.

Is the cheapest option cheaper in the long run?

Not always. A low hourly bill can look good until the server fails on a busy morning and the front desk cannot see the schedule, check in patients or pull up X-rays. The cost of a slow or lost day often has little to do with the IT invoice.

On the other hand, a small, simple clinic with modern equipment may genuinely need very little help, and paying by the hour can make sense. The right answer depends on how much downtime your clinic can handle and how much you want problems caught before staff notice them. No setup removes all risk, but regular maintenance and monitoring make many common problems less likely and quicker to fix.

Checklist: questions to ask when comparing quotes

When you have two or three quotes in front of you, ask each provider:

  1. What exactly does the monthly fee cover: monitoring, updates, backup checks, remote help, onsite visits?
  2. How are onsite visits billed, and is there a minimum charge?
  3. How is travel time billed?
  4. What are your live support hours, and what happens if something breaks after hours?
  5. How quickly do you respond to a support request?
  6. Have you worked with our practice management and imaging software before?
  7. Who checks that our backups can actually be restored, and how often?
  8. Which projects or tasks fall outside the monthly fee?
  9. Is there a contract term, and what happens if we want to leave?

Write the answers down side by side. Differences usually show up quickly.

How do I get an accurate number for my clinic?

Any honest quote starts with a look at what you have. You can speed this up by gathering:

  1. A count of computers, laptops and printers, and roughly how old they are
  2. Whether you have a server, and how old it is
  3. Your practice management software and imaging equipment
  4. How your data is backed up today
  5. Any problems that keep coming back
  6. Plans for the next year or two, such as new operatories, a renovation or a second location

With that list, a provider can tell you what monthly or hourly costs to expect, and flag any upcoming hardware replacements so they do not catch you off guard.

How Starcomm can help

We have been supporting dental clinics and healthcare offices across Mississauga, Toronto and the GTA since 1999, and we know the software and imaging systems dental offices rely on. Whether you want to pay by the hour or prefer a flat monthly fee, we will explain what is included, what is not, and what we think your clinic actually needs. You can read more about our dental IT support or see our pricing.

To get a quote for your clinic, call us at 905-816-9797 or contact us.

Frequently asked questions

Does Starcomm's managed IT monthly fee include onsite visits?

No. The flat monthly fee covers 24/7 monitoring, maintenance and unlimited remote support. Onsite visits for managed clients are billed separately at a discounted hourly rate.

Can a small dental office just pay by the hour?

Yes. Hourly support can suit a small clinic with newer equipment and few problems. At Starcomm it is $120 per technician hour, with a 30-minute minimum for remote sessions and a 2-hour minimum for onsite visits.

Why can't you give a monthly price without seeing my clinic?

The fee depends on how many computers you have, whether you run a server, which imaging and practice software you use and how old your equipment is. A short review of your setup lets us quote a number that reflects your clinic rather than a guess.

Are software licences like Dentrix or ABELDent included in IT support costs?

Usually not. Practice management and imaging software licences are typically paid to the software vendor, while your IT provider looks after the computers, network and server the software runs on.

Can I reach a Starcomm technician at any hour?

Monitoring of managed clients' systems runs 24/7, but live support is available Monday to Friday 8 am to 8 pm and Saturday 10 am to 4 pm, Eastern time. Sundays and after hours are for emergencies only.

← All posts