Should Dental Office Computers Be Shut Down at Night?

By Starcomm Technologies ·

For most dental offices, the server should stay on all the time. The workstations at the front desk and in the operatories should be signed out at the end of the day, then either left on for overnight maintenance or shut down, depending on how your updates and backups are scheduled.

The on-or-off choice matters less than three habits: every computer gets a full restart regularly, nobody stays logged in overnight, and your backups and updates get a chance to run.

The short answer

  • Server: leave it on. Shut it down only for planned maintenance or when a battery backup tells it to during a power outage.
  • Front desk and operatory computers: sign out every night. Leaving them on or shutting them down can both work if your IT setup is planned around it.
  • Restarts: every workstation should get a real restart at least once a week. Nightly is fine too.
  • Imaging computers: close the imaging software properly before leaving, whatever else you do.

Should the dental office server ever be shut down at night?

In almost every case, no. The server is the central computer that holds your practice management database (Dentrix, ABELDent, Tracker, ClearDent or similar), and often your X-rays and scanned documents too. Overnight is usually when the server does its most important work:

  • Running backups of patient records and images
  • Copying those backups offsite or to the cloud
  • Installing updates and running maintenance tasks

Shutting it down every evening interrupts that work. It can also leave the database in an awkward state if it is switched off while something is still writing to it. Servers are built to run continuously, so there is no wear-and-tear reason to turn yours off.

The one thing a server does need is protection from sudden power loss. A battery backup lets it ride through short outages and shut down cleanly during long ones. We cover that in Does a Dental Office Need a Battery Backup for Its Server?. If you're not sure what your server does or whether you still need one, see What a Dental Office Server Does and Whether You Still Need One.

Is it better to leave workstations on or turn them off?

Both approaches have real benefits.

Reasons to leave workstations on overnight

  • Updates install after hours. Windows and software updates can install and restart the computer at night instead of during a morning appointment.
  • Maintenance can run. Virus scans, monitoring tools and remote maintenance need the computer switched on.
  • Faster mornings. Staff sign in and go, rather than waiting for a cold start.

Reasons to shut workstations down

  • Less power and heat. Useful in small operatories and tight front desk areas.
  • Fewer hours exposed. A computer that is off can't be reached by anyone over the network.
  • A cleaner start. Software that slowly gets sluggish over a long day starts fresh (with one catch, explained below).

What we usually suggest

For most clinics, we prefer to leave workstations on, signed out, with updates and a restart scheduled after hours. That way maintenance happens while nobody is working, and each machine still gets a regular fresh start.

If your office prefers to shut everything down, that can work too. Just make sure updates still get installed, either during a set window in the day or using Wake-on-LAN (a setting that lets the network switch a computer on for maintenance and then off again).

The one setup we'd steer you away from is computers left on overnight, logged into the practice software, with the screen unlocked.

Does Shut down in Windows really give a fresh start?

Often it doesn't. Windows 10 and 11 have a feature called Fast Startup, which is turned on by default on many computers. With Fast Startup on, choosing Shut down saves part of the system to disk so the next startup is quicker. That means some of the leftover clutter that slows a computer down can come back the next morning.

Choosing Restart does a full reset. So if a computer has been acting slow or odd, a restart is more likely to help than a shut down and power on. It's also why we suggest a scheduled restart even in offices that shut down every night.

A related point: Microsoft ended support for Windows 10 on October 14, 2025. If any of your workstations still run it, they no longer get regular security updates, so any overnight update routine is doing less for them. That's worth a conversation with your IT provider.

Why staying logged in overnight is the bigger concern

Whatever you decide about power, signing out matters more. A computer left logged in overnight is open to anyone who walks past it: cleaning staff, contractors, or anyone who gets into the building. If the practice software is open, patient information may be on the screen or a click away.

Ontario's health privacy law, PHIPA, expects clinics to take reasonable steps to protect patient information, and locking or signing out of unattended computers is one of the simplest steps there is. For specifics about your own obligations, the Information and Privacy Commissioner of Ontario and your college are good places to confirm details.

There's also a practical reason. Many practice management programs back up more cleanly when nobody has the database open. If a workstation stays logged into the software overnight, it can hold files open and interfere with the backup. Your software vendor or IT provider can tell you how your particular backup handles this.

What about imaging and X-ray computers?

Imaging computers deserve a little extra care. Before leaving for the day:

  • Close the imaging software (Dexis, Carestream, Schick, Sidexis and so on) properly rather than leaving it open.
  • Leave sensors and intraoral cameras connected as they normally are, unless the manufacturer says otherwise.
  • Make sure the computer gets a regular restart. Imaging programs and their device drivers (the small programs that let a computer talk to a sensor or camera) can become unreliable after many days without one.

If a sensor or scanner often isn't recognized first thing in the morning, mention it to your IT provider. It's often a sign of a power-saving setting or a computer that hasn't been restarted in a long time.

An end-of-day routine for your team

Post this near the front desk or add it to your closing checklist:

  1. Finish and save any open charts, notes and treatment plans.
  2. Close the practice management software and imaging software on every computer.
  3. Sign out of Windows (or at minimum lock the screen) on every workstation.
  4. Either leave workstations on for overnight maintenance or shut them down, whichever your office has agreed on with your IT provider.
  5. Leave the server, network equipment and phone system switched on.
  6. Turn off monitors if you like. It saves a bit of power and doesn't affect maintenance.
  7. Once a week, choose Restart on any computer that hasn't been restarted recently.
  8. If something looked wrong during the day (a slow computer, an error, a backup warning), report it before you leave so it can be looked at.

What about storms and power outages?

Computers that are switched off are less affected by brief power flickers, which is one small point in favour of shutting down. But the server and network equipment stay on regardless, so they should be on a battery backup and surge protection either way. A battery backup lowers the risk of damage and corrupted data during an outage, though no setup removes all risk.

How Starcomm can help

With our managed IT services, we set up and run this routine for you. Updates and restarts are scheduled after hours, backups are checked, and the network is monitored 24/7, so problems such as a failed backup or a server that went offline overnight are spotted early. Remote support during our business hours is included in the flat monthly fee. Onsite visits are billed separately at a discounted rate for managed clients.

We've supported dental clinics across Mississauga, Toronto and the GTA since 1999. If you'd like help working out the right end-of-day setup for your office, call us at 905-816-9797 or contact us.

Frequently asked questions

Does leaving computers on all night wear them out faster?

Not in any way that matters for a typical office. Modern computers handle being on for long stretches; heat, dust and age are bigger factors in how long they last.

Should we turn off the network switch, router or phone system at night?

No. Leave networking equipment and the phone system on so overnight backups, updates, monitoring and after-hours voicemail keep working.

Is putting a computer to sleep a good middle ground?

Sleep saves power, but a sleeping computer usually can't install updates or be maintained unless it is set to wake for them. If you use sleep, ask your IT provider to set the power options so scheduled maintenance still runs.

How do we know if overnight backups and updates are actually happening?

Check your backup software's reports or ask your IT provider for confirmation that recent backups finished and updates installed. If nobody is checking regularly, that is worth fixing before choosing between on and off.

← All posts