Does Your Dental Office Need a Firewall Beyond the ISP Box?

By Starcomm Technologies ·

A firewall is the gatekeeper between your dental office's computers and the internet. It decides what traffic is allowed in and out, and blocks the rest. The modem your internet provider installed has a basic firewall built in, and for a home that is usually fine. A clinic stores patient health records, runs imaging, takes card payments and often lets staff connect from home, so the provider's box is usually not enough on its own. A business-grade firewall that someone looks after is the better choice.

Below we explain what a firewall does, where the provider's box falls short, and what to check in your own office.

What does a firewall actually do?

Think of your front desk. Patients with appointments are let in, couriers drop off at the counter, and strangers don't wander into the operatories. A firewall does the same job for your network (the computers, imaging stations, printers and phones connected in your office). It:

  • Blocks uninvited connections from the internet that try to reach your computers
  • Controls what goes out, so a computer infected with harmful software has a harder time contacting the people behind it
  • Keeps different parts of the office apart, such as patient Wi-Fi and the computers that run your practice software
  • Allows safe remote access for staff who need to connect from outside the office
  • Keeps a record of what it allowed and blocked, which helps when something looks wrong

What does the internet provider's box do?

Most clinics have a single box from Bell, Rogers or another provider that acts as a modem (the part that connects to the internet), a router (the part that shares that connection with your devices) and a Wi-Fi access point.

These boxes do have a basic firewall. By default, they block most uninvited connections coming in from the internet. That is a real protection, and it is the reason a home computer isn't wide open to the world.

The trouble is that these boxes are built for homes and very small offices. They do one simple job well, but a dental office asks more of its network.

Where does the provider's box fall short for a dental office?

Everything sits on one network

With a provider's box, the front desk computer, the server, the X-ray sensors, the phones, the security cameras, staff phones and often patient Wi-Fi all share the same network. If one device is infected, it can reach everything else. Separating these into their own zones is one of the most useful things a business firewall does.

Little or no inspection of what gets through

A basic firewall checks whether a connection was invited. It doesn't look closely at what is inside that connection. Harmful downloads, visits to known bad websites and suspicious traffic from inside the office usually pass straight through.

Remote access is often set up the risky way

When a dentist wants to check the schedule from home, a common shortcut is port forwarding. That means telling the provider's box to let outside connections straight through to the server or a front desk computer. It works, but it leaves a door facing the internet that attackers actively look for. A business firewall offers a VPN instead, which is a private, encrypted tunnel that only approved people can use.

No one is watching it

The provider's box rarely alerts anyone when something unusual happens. Its settings are often left as they came out of the box, sometimes with the default admin password still in place.

Limited control over updates and settings

The box's firmware (the built-in software that runs it) is updated on the provider's schedule. Many of the settings a clinic would want are simply not available.

What does a business firewall add?

The type usually recommended for clinics is called a next-generation firewall. It is a dedicated device that does more than block uninvited connections. Typical features include:

  • Network separation. Your practice computers, imaging, phones, cameras and patient Wi-Fi each get their own zone, often called a VLAN (a separate virtual network). They can only talk to each other where you allow it. Our post on setting up patient Wi-Fi safely goes into this in more detail.
  • Intrusion prevention. It watches traffic for patterns that match known attacks and blocks them.
  • Web filtering. It blocks known harmful or phishing websites before a page loads.
  • VPN for remote access. Staff connect through an encrypted tunnel instead of an open door to the server.
  • Logs and alerts. It keeps a record of activity and can notify your IT provider when something looks off.
  • Security subscriptions. These keep the firewall's list of threats current, which matters because attacks change constantly.

Do we still need the provider's box if we add a firewall?

Usually yes, because you still need a modem to connect to the internet. The common setup is to put the provider's box into bridge mode, which turns off its router and firewall features so it acts only as a modem. The business firewall then handles everything behind it. This avoids two devices fighting over the same job, which can cause problems with things like VoIP phones and remote access.

Some providers handle bridge mode differently, so it is worth having whoever sets up the firewall confirm the right settings for your service.

Is a firewall enough to protect patient data?

No, and it is important to be clear about that. A firewall is one layer, and no single device removes all risk. A phishing email, for example, arrives through normal email traffic that the firewall is meant to let through. A firewall works best alongside:

  • Multi-factor authentication on email and remote access (see our post on where to turn on MFA)
  • Protection software on every computer
  • Regular updates for Windows, practice software and imaging software
  • Backups that are tested and kept separate from the main network
  • Staff who know how to spot suspicious emails

Under Ontario's PHIPA, health information custodians are expected to take reasonable steps to protect personal health information. A properly managed firewall is a common part of that, but it doesn't make an office compliant on its own. For specifics, the Information and Privacy Commissioner of Ontario has guidance for health care providers, and your college or a lawyer can advise on your situation.

A quick checklist for your office

You don't need to be technical to run through these. If you aren't sure of an answer, that is useful to know too.

  1. Find out what is sitting between your office and the internet. Is it only the provider's box, or is there a separate firewall?
  2. Ask whether patient Wi-Fi is on its own network, separate from the computers that run your practice software.
  3. Check how staff connect from home. If the answer involves opening a port to the server or a front desk computer, ask about moving to a VPN with multi-factor authentication.
  4. Confirm the admin password on the provider's box and any firewall has been changed from the default.
  5. Ask when the firewall's firmware was last updated and whether its security subscriptions are current.
  6. Find out who gets an alert if the firewall sees something unusual, and what they do about it.
  7. Check whether the firewall is still supported by its manufacturer. An older model that no longer gets updates should be planned for replacement.

How Starcomm can help

We set up and look after business firewalls for dental clinics and healthcare offices across Mississauga, Toronto and the GTA. That includes separating practice computers, imaging, phones and patient Wi-Fi, replacing risky remote access with a VPN, and putting the provider's box into the right mode. You can read more on our cybersecurity services page.

For clinics on our managed IT services plan, we monitor the network around the clock and keep firewall updates and settings maintained, with remote support during our business hours.

If you would like us to review what is between your clinic and the internet, call us at 905-816-9797 or contact us.

Frequently asked questions

Can we just buy a better router from an electronics store?

Consumer routers are built for homes and usually lack features a clinic needs, such as proper network separation, VPN with multi-factor authentication, and alerts. Even a business firewall needs careful setup, because one left on default settings offers much less protection than it could.

Will a business firewall slow down our internet?

Checking traffic does take processing power, so the firewall should be sized for your internet speed and the number of devices in the clinic. An undersized model can become a bottleneck, which is why it's worth choosing one with your actual connection in mind.

Are there ongoing costs after buying a firewall?

Many business firewalls use security subscriptions that keep their threat information current, and these are renewed periodically. Someone also needs to install updates, review settings and respond to alerts, whether that's your IT provider or someone in-house.

How can our dentist safely check the schedule from home?

The safer approach is a VPN with multi-factor authentication, rather than opening a port on the router to the server or a front desk computer. If your practice software is cloud-based, use its own login with multi-factor authentication turned on.

When should a dental office replace its firewall?

Plan to replace it before the manufacturer stops releasing updates for that model, or when it can no longer keep up with your internet speed. A firewall that no longer gets security updates becomes steadily less useful over time.

← All posts