IT Checklist for Moving a Dental Office in the GTA
An IT checklist for moving a dental office covers six things: ordering internet and phone service for the new space early, getting network cabling and Wi-Fi in before the walls close, checking with your software and imaging vendors, taking and testing a full backup, moving the server and computers carefully, and testing every operatory before the first patient. The single most useful step is starting early. Internet installation and cabling often take longer to arrange than the move itself.
Below is the checklist we use when helping clinics in Mississauga, Toronto and across the GTA, broken into before, during and after the move.
When should you start planning the IT side of a move?
As soon as you sign the lease or start construction drawings. The IT pieces that cause delays are the ones that depend on other people:
- Your internet provider, who may need to bring a new line into the building
- Your contractor, who needs to know where network cables, the network closet and power outlets go before drywall goes up
- Your software and imaging vendors, who may need to re-register licences or reinstall drivers
If you bring your IT provider into the planning early, they can mark up the floor plan with you and catch problems while they are still cheap to fix.
Before the move: getting the new space ready
Internet and phones
Order business internet for the new address early, and ask the provider for a confirmed installation date. New buildings and units that have never had service can take a while to connect.
If you use VoIP phones (phone service that runs over your internet connection), confirm your main clinic number can be moved, or ported, to the new address with no gap. Ask your phone provider how call forwarding will work on moving day so patients can still reach you.
It is also worth thinking about a backup internet connection, so a single outage does not stop booking and billing.
Cabling, Wi-Fi and the network closet
Dental offices depend on wired connections. Each operatory usually needs several network outlets: one for the chairside computer, one for imaging equipment and often one for a phone. The front desk, consult rooms, sterilization area and doctor's office all need them too.
Before walls close, decide:
- Where the network closet will be, with enough space, power and airflow for the server, network switches and internet equipment
- How many network outlets each room needs, with a few spares
- Where Wi-Fi access points (the small devices that broadcast wireless signal) will go, so signal reaches every operatory
- Where your security cameras and door access readers will connect, if you have them
Our network cabling and Wi-Fi page explains what proper clinic cabling involves.
Power for the server
Give the server and network equipment dedicated outlets and plan for a battery backup unit (a UPS), which keeps equipment running briefly during a power blip and lets the server shut down cleanly in a longer outage.
Before the move: software, imaging and data
Talk to your vendors
Practice management software such as Dentrix, ABELDent, Tracker or ClearDent, and imaging software such as Dexis, Schick or Carestream, can be sensitive to changes. A new server name, network address or computer may mean a licence needs to be reactivated or a sensor driver reinstalled.
Call each vendor's support line, tell them your moving date and ask:
- Will any licences need to be transferred or reactivated?
- Do you need to be available on moving day or the morning after?
- Is there an update we should install before the move rather than after?
Take an inventory
List every device that is moving: server, workstations, monitors, printers, scanners, intraoral cameras, sensors, phones, routers and network switches. Label each one with the room it is going to. This makes setup much faster and shows you what is old enough to replace rather than move. If equipment is near the end of its life, a move is a natural time to retire it.
Back up everything, then test it
The night before the move, take a full backup of the server, including the patient database and imaging files, and confirm the offsite or cloud copy is current. Then test that the backup can actually be restored. A backup that has not been tested is a hope, not a plan. Our backup and disaster recovery page covers how a layered backup works.
Moving day: what should happen to the computers and server?
The server holds your patient records and images, so it deserves more care than the furniture.
- Shut the server down properly through its software, not by pulling the plug
- Pack it upright with padding, and move it in a staff or IT provider's car rather than the general moving truck where you can
- Keep backup drives in a separate vehicle from the server, so one accident cannot affect both
- Photograph cable connections at each workstation before unplugging
- Keep a record of who handled patient-data devices and when
We go into more detail on the physical move in who moves a dental office's computers and servers in the GTA.
After the move: how do you know everything works?
Plan to finish setup with at least a full day before patients arrive, so there is time to fix surprises. Then walk through this test list room by room:
- Server starts up and the practice management software opens on every workstation.
- Each user can log in with their own account and sees the correct schedule.
- Every imaging sensor and intraoral camera captures an image, and that image saves to the right patient chart.
- X-ray images can be opened from other operatories and the doctor's office.
- Printers and scanners work from the front desk and wherever else they are used.
- Phones ring, transfer and reach voicemail, and outside callers reach the main number.
- Card payment terminals process a test transaction.
- Insurance claims can be sent electronically.
- Wi-Fi reaches every operatory, and any patient Wi-Fi is kept separate from the clinic network.
- Overnight backups run and complete after the move, and the offsite copy updates.
- Security software, firewall and remote monitoring are active on the new network.
- Security cameras and door access, if you have them, are recording and working.
Ask each staff member to do one real task on their own computer during this test. They will spot small problems no checklist catches.
What about patient privacy during a move?
In Ontario, health information custodians have obligations under PHIPA, Ontario's health privacy law, to protect patient information, and that includes while equipment is in transit. In general terms, that means keeping devices with patient data under your control, limiting who handles them and keeping a record.
If you are retiring old computers or drives, wipe or destroy the storage securely and keep a record of it rather than leaving equipment behind or putting it in recycling as is. The Information and Privacy Commissioner of Ontario publishes guidance for custodians, and your college or a lawyer can confirm what applies to your clinic.
Common mistakes to avoid
- Ordering internet last and opening with no connection
- Letting a contractor run cabling without a plan for each operatory
- Forgetting to tell imaging vendors until a sensor will not connect
- Moving the only backup in the same box as the server
- Booking a full patient schedule for the first morning in the new space
No plan removes every risk, but working through these steps in order lowers the chance of a stressful first week.
How Starcomm can help
We have been supporting dental offices since 1999 from our base in Mississauga, and we work with the practice management and imaging software most GTA clinics use. For a move, we can help plan the cabling and network closet with your contractor, coordinate with your internet and software vendors, move and reconnect the server and operatory computers, and test each room before you reopen.
Move work is onsite work, billed at $120 per technician hour with a two-hour onsite minimum. If you are on our managed IT plan, onsite work is billed separately at a discounted hourly rate. Learn more about our dental IT support, call us at 905-816-9797 or contact us to talk through your move.
Frequently asked questions
How far in advance should a dental office plan its IT for a move?
Start when you sign the lease or begin construction drawings. Internet installation and network cabling depend on outside schedules, so they are the pieces most likely to cause delays if left late.
Can we keep our clinic phone number when we move?
Usually yes. Ask your phone provider to port the number to the new address and set up call forwarding for moving day so patients can still reach you during the switchover.
Should we replace old computers before a move or after?
A move is a good time to retire equipment that is near the end of its life, since you avoid packing and reconnecting it twice. Make sure old drives are securely wiped or destroyed and keep a record of it.
Do we need to tell our dental software company we are moving?
It is a good idea. Practice management and imaging software can need licences reactivated or drivers reinstalled when a server or network changes, so give each vendor your moving date ahead of time.
Can we see patients the day after the move?
It is possible, but leave at least a full day between setup and your first patients for testing. Starting with a lighter schedule on the first morning gives you room to fix small issues.