Why Dental Office Software Updates Matter and When to Run Them
Software updates matter because they close known security holes, fix bugs and keep your practice management software, imaging software and Windows working with each other. In a dental office, most updates should run after hours, on a planned schedule, with a recent backup in place. Bigger upgrades, such as a new version of Dentrix or ABELDent, should be planned for a quiet time when help is reachable, never in the middle of a patient day.
Below we explain what needs updating, why it is worth the effort, and a simple schedule that keeps the front desk and operatories running.
What counts as a software update in a dental office?
Most people think of the Windows prompt asking to restart. In a typical clinic, though, several layers need attention:
- Windows on every front desk, operatory and office computer, and on the server if you have one.
- Practice management software such as Dentrix, ABELDent, Tracker, ClearDent, Eaglesoft or Open Dental.
- Imaging software and drivers for sensors, panoramic units and intraoral cameras, such as Dexis, Carestream, Schick or Sidexis. A driver is the small program that lets a computer talk to a piece of hardware.
- Microsoft 365 or Office, web browsers, PDF readers and other everyday programs.
- Antivirus or endpoint protection, the software that watches each computer for threats.
- Firmware on your firewall, router, switches, Wi-Fi access points and server. Firmware is the built-in software that runs a device itself.
Each layer has its own update schedule, and they affect each other. That is why updates work best as a planned routine rather than whatever happens to pop up.
Why do software updates matter so much?
They close security gaps
When a software maker finds a weakness, it releases a fix, often called a patch. Once a fix is public, the weakness becomes widely known, and attackers look for computers that have not been patched yet. Keeping up with updates makes it much harder for ransomware and other attacks to get in through doors that have already been closed for everyone else. It does not remove all risk, but it removes the easiest openings.
For a clinic that holds patient health information, this is also part of taking reasonable care of that data under Ontario privacy rules. Your college or a privacy lawyer can tell you what applies to your practice specifically.
They fix bugs and slowdowns
Many updates are not about security at all. They fix crashes, printing problems, freezes in charting screens, or issues with insurance claim submission. If staff keep hitting the same glitch, a pending update is sometimes the answer.
They keep your software talking to each other
Your practice management software, imaging software and Windows all need to be on versions that work together. When one falls too far behind, the link between charting and X-rays can stop working, or a sensor may not be detected.
They keep you supported
Software vendors usually support only recent versions. If you call for help on an old version, the first answer is often to upgrade. The same goes for Windows: Microsoft ended support for Windows 10 on October 14, 2025, so Windows 10 computers no longer get regular security updates unless the office paid for Microsoft's Extended Security Updates. If you still have some, our post on how often a dental office should replace computers and servers can help you plan.
Can an update break something?
Yes, occasionally. A Windows update can conflict with an older sensor driver, or a new version of imaging software may need a matching version of your practice software. This is the main reason offices put updates off.
The answer is not to stop updating. It is to update with care:
- Check the vendor's release notes and compatibility list before a major upgrade.
- Take a backup first, and confirm it finished.
- Update one computer first when practical, test it, then roll out to the rest.
- Hold back large Windows feature updates (the yearly upgrades, as opposed to monthly security fixes) on imaging computers until your imaging vendor says they are supported.
This kind of planned approach is often called patch management: deciding what gets updated, when, and checking that it worked.
When should updates run in a dental office?
The short answer is outside clinic hours, on a predictable schedule. Here is how it usually breaks down.
Windows and Microsoft security updates
Microsoft releases its regular security updates on the second Tuesday of each month. A sensible pattern is to let them install overnight within a few days of release, on computers that are left on (or set to wake) so the update can run while nobody is using them. A computer that is shut off every night may never get the chance, and then nags staff to restart during the day.
The server
If you have a server, it should be updated and restarted in a planned window, such as a weekend evening, because every workstation depends on it. Restarting a server mid-morning can stop the whole clinic.
Practice management and imaging software
These are the updates to plan most carefully. They often need the server and every workstation on the same version, and the update may change how the database is stored. Good timing is:
- After closing, on a day when the next morning is not fully booked.
- When both your software vendor's support and your IT support are reachable, in case something needs attention. Check the vendor's support hours before you start.
- Not right before tax-season reporting, month-end, or a day you have already planned to be short-staffed.
Firewall and network equipment
Firmware updates on the firewall or Wi-Fi can briefly take the internet or network down, so these belong in an evening or weekend window too.
What about urgent fixes?
Sometimes a vendor releases an urgent fix for a weakness that is being actively used by attackers. These are worth applying sooner than the normal schedule, still outside patient hours where possible, such as that same evening.
A simple update routine for your clinic
- List what you have. Every computer, the server, your practice and imaging software versions, and network devices.
- Pick a regular window. For example, overnight for workstations and a weekend evening each month for the server.
- Leave computers on or set to wake on update nights, and tell staff why.
- Confirm the backup completed before any major update. Our guide on how to test whether your backup really works explains how.
- Read release notes for practice and imaging software, and check compatibility before upgrading.
- Test one computer after a big update: open a chart, take a test image, print, and send a claim.
- Roll out to the rest, then check that every computer actually updated.
- Keep a short log of what was updated and when, so problems can be traced quickly.
What habits should staff avoid?
- Clicking "remind me later" for days or weeks on the restart prompt.
- Installing updates for imaging or practice software on their own, without checking with whoever manages your IT.
- Restarting the server during the day to make a prompt go away.
- Ignoring a computer that keeps saying an update failed. That usually means something needs a closer look.
How Starcomm can help
Keeping all of this on schedule is a big part of what our managed IT services cover. Your network is monitored 24/7, and updates for Windows, the server and supporting software are planned and applied outside clinic hours, with checks that they actually installed. Remote support is included in the flat monthly fee; onsite visits for managed clients are billed separately at a discounted hourly rate. We work with practices that run Dentrix, ABELDent, Tracker, ClearDent and other dental software across Mississauga, Toronto and the GTA, so we plan practice and imaging upgrades with those systems in mind.
If you would rather have us help on a single upgrade, our pay-as-you-go support is $120 per technician hour. Either way, call us at 905-816-9797 or contact us and we will talk through what your clinic needs, in plain English. Our live support hours are Monday to Friday 8 am to 8 pm and Saturday 10 am to 4 pm, Eastern time.
Frequently asked questions
Should we turn on automatic updates on every dental office computer?
Automatic monthly security updates are generally a good idea, scheduled to install overnight. Larger Windows feature upgrades and practice or imaging software updates are better handled manually, after checking that your dental software supports them.
How long does a practice management software upgrade usually take?
It depends on the software, the size of your database and how many computers need updating. Plan for an after-hours window with some extra time built in, and don't start one an hour before the morning's first patient.
Do we need to update the software on our X-ray sensor computers too?
Yes, those computers need security updates like any other, but they deserve extra care. Check that your imaging vendor supports a new Windows version or driver before installing it, and test a sensor capture afterward.
Is it safe to skip updates if everything is working fine right now?
Skipping updates leaves known weaknesses open, and the longer you wait, the bigger and riskier the eventual catch-up becomes. Small, regular updates on a schedule are usually much easier than one large jump later.
Who should be responsible for updates in a small dental clinic?
One person or provider should own the schedule so nothing gets missed or done twice. Many clinics hand this to their IT provider so staff can focus on patients rather than restart prompts.