Setting Up Dual Monitors and a Chairside Screen in an Operatory
Most dental operatories run one computer with two screens: a clinician monitor for charting and the schedule, and a chairside patient screen for showing x-rays, intraoral photos and treatment plans. The computer is usually set to extend the desktop across both screens, so the patient sees only what you choose to move over. A good setup comes down to three things: where the screens go, how the cables reach them, and making sure the patient screen never shows another patient's information.
What does a typical two-screen operatory look like?
In most clinics we see, each operatory has:
- One computer, often a small-form-factor PC tucked under the counter, in a cabinet or behind the chair.
- A clinician monitor where the dentist or hygienist works in the practice management software, such as Dentrix, ABELDent, Tracker or ClearDent.
- A patient screen mounted where the person in the chair can see it comfortably, used for imaging software like Dexis, Carestream or Sidexis.
- Connected devices such as an x-ray sensor, an intraoral camera and sometimes an intraoral scanner, all plugged into the same computer.
Some clinics add a third display, such as a ceiling-mounted TV for patient entertainment. That works on the same principles, but every extra screen means another cable, another power outlet and another thing to keep private.
Should the two screens mirror or extend?
Windows can show the same picture on both screens (duplicate or mirror) or treat them as one wide desktop (extend).
Extend is the right choice for almost every operatory. It lets the clinician keep the chart and notes on their own screen while dragging an x-ray or photo over to the patient screen. Mirroring means the patient sees everything the clinician sees, including the schedule, other patients' names and pop-up messages.
A few practical tips once the screens are extended:
- Set the clinician monitor as the main display, so new windows, sign-in prompts and notifications open there rather than in front of the patient.
- Line up the screens in Windows display settings to match how they sit in the room, so moving the mouse from one to the other feels natural.
- Open the imaging program on the patient screen once and close it there. In most cases Windows and the software remember where a window was last placed, though updates can sometimes reset this.
- Learn the shortcut Windows key + P, which switches between display modes. It is the quickest fix when a screen suddenly shows the wrong thing.
Where should each screen be mounted?
The clinician screen
The clinician screen should sit where the dentist or hygienist can glance at it without twisting, usually near their working position on the counter or on a wall arm. An adjustable arm helps when more than one provider uses the room. Think about glare from the operatory light and windows, and keep the screen out of the patient's direct line of sight.
The patient screen
The patient screen is usually on an arm attached to the chair, the light post, or the wall or ceiling in front of the chair. Many chair manufacturers offer their own monitor mounts, which is often the cleanest option. Whatever you choose:
- The patient should be able to see it while reclined and while sitting up for a treatment discussion.
- It should swing out of the way so it doesn't get bumped during procedures.
- The arm should be rated for the weight and mounting pattern of the monitor (most monitors use a standard VESA mount, meaning a set of screw holes on the back).
If you are planning a renovation, decide on screen positions early. Moving a mount later is easy; moving the cable and power behind a finished wall is not.
How do the cables get from the computer to the screens?
This is where many operatory setups go wrong. Video cables such as HDMI and DisplayPort work reliably over short distances, but longer runs can cause flickering, blank screens or a picture that drops out when the chair moves.
Common approaches:
- Direct cables when the computer is close to both screens. Use good-quality cables of the right length rather than joining several together.
- HDMI-over-network extenders, small boxes at each end that carry the video signal over a network-style cable (such as Cat6). These suit longer runs, like a computer in a back cabinet feeding a ceiling-mounted screen.
- Cable routing through the chair or wall, using the chair's cable channels or conduit (a protective tube inside the wall), so nothing hangs loose across the floor.
Also check that the computer's graphics card has enough of the right outputs for every screen, and that there is a power outlet near each mount. Our post on cabling and Wi-Fi for dental clinics covers planning cable runs during a build-out.
How do you keep the patient screen private?
The patient screen is the one place in the clinic where a patient is looking directly at your computer. Under Ontario's health privacy law (PHIPA), clinics are expected to take reasonable steps to protect patients' personal health information, and a chairside screen showing the day's schedule is an easy slip to make. Your college or a privacy lawyer can confirm what applies to your clinic.
Simple habits lower the risk:
- Keep the schedule, other charts and email on the clinician screen only.
- Turn off pop-up notifications for email and chat, or make sure they appear on the main screen.
- Close the previous patient's images before the next patient sits down.
- Use a patient education slideshow or a plain background as the default on the patient screen.
- Lock the computer (Windows key + L) when stepping out of the room.
What about infection control?
Screens, mounts, keyboards and mice in the operatory get wiped down constantly. Choose equipment that can handle your clinic's cleaning products, and check the manufacturer's cleaning guidance. Sealed or washable keyboards and mice are common in operatories, and some clinics use barrier covers on screens and arms. Keep cables enclosed so there are fewer surfaces to clean.
Setup checklist for a new or renovated operatory
- Decide where the clinician and patient will each look, and mark both screen positions on the plan.
- Confirm the mount type: chair-mounted, wall arm or ceiling, and that it fits the monitor.
- Plan the computer's location with airflow and easy access for service.
- Measure every cable run and choose direct cables or extenders to match.
- Put power outlets and network jacks where the equipment will actually sit.
- Check the graphics card has enough outputs for every screen.
- Set Windows to extend, make the clinician screen the main display and arrange the screens to match the room.
- Open your practice software and imaging software on the right screens and test the x-ray sensor and intraoral camera.
- Turn off pop-ups on the patient screen and set a neutral default display.
- Walk through a mock appointment with a staff member in the chair.
What should you check when a chairside screen goes wrong?
Before calling for help, a few quick checks often sort it out:
- Blank screen: Is the monitor powered on and set to the right input? Press Windows key + P and choose Extend.
- Images open on the wrong screen: Drag the window to the patient screen and close it there so it reopens in the same place.
- Flickering or dropouts when the chair moves: Often a loose or strained cable at the arm or chair. Note when it happens and tell your IT provider.
- Wrong size or blurry text after an update: Check the resolution and scaling in Windows display settings.
How Starcomm can help
We plan and set up operatory screens as part of our computer hardware and operatory setup work, including mounts, cable runs, display settings and testing alongside your imaging and practice software. If you are renovating or opening a new clinic in Mississauga, Toronto or elsewhere in the GTA, we can help with the network cabling as well, and our dental IT support page explains how we work with dental clinics day to day.
To talk about your operatories, call us at 905-816-9797 or contact us.
Frequently asked questions
Can one computer run both the clinician screen and the patient screen?
Yes. Most operatories use a single computer with two video outputs, set to extend the desktop. You only need extra hardware if the graphics card lacks enough outputs or the cable runs are long.
Should the patient screen be a touch screen?
It usually doesn't need to be. Patients mainly watch while the clinician controls things, and touch screens add cost and more surfaces to disinfect, though some clinics like them for treatment discussions.
Can a regular TV be used as the patient screen?
A TV can work, especially for ceiling mounts, but check that it handles computer resolutions cleanly, wakes reliably, and doesn't show its own menus or channels when the computer goes to sleep.
Why do my x-ray images keep opening on the wrong monitor?
Windows and many programs reopen a window where it was last closed, and updates or a disconnected screen can reset that. Move the window to the right screen and close it there; if it keeps happening, your IT provider can check the display settings.