What IT a New Dental Office Needs Before Opening Day

By Starcomm Technologies ·

Before opening day, a new dental office needs a working network (cabling, Wi-Fi, internet and a firewall), practice management software set up on a server or in the cloud, computers at the front desk and in every operatory, imaging equipment installed and tested, phones, and backup and security in place before any patient data goes in. The part people most often leave too late is the cabling, which is far easier and cheaper to do while the walls are still open. If you start planning your IT at the same time as your floor plan, opening day is much calmer.

Below is what each piece involves, when it needs to happen, and a checklist you can use.

When should IT planning start for a new dental office?

As soon as you have a floor plan. Your IT decisions affect where electrical outlets go, where data jacks sit in each operatory, whether you need a small equipment closet, and how the front desk is laid out. Once drywall is up, every change means opening walls or running cables along the surface.

A good rough order looks like this:

  • During design: decide on your practice management software and imaging equipment, because their requirements shape everything else.
  • During construction: network cabling, the equipment closet, power and internet installation.
  • A few weeks before opening: computers, server or cloud setup, imaging, phones, printers, security and backup.
  • The last week: testing every room, staff logins, and a practice run at the front desk.

Internet providers can take a while to install service at a new address, so order your connection early.

What needs to go in during construction?

Network cabling

Every operatory usually needs several wired data jacks: one for the chairside computer, one for imaging equipment, and spares for whatever you add later. The front desk, the doctor's office, the sterilization area and any pano or CBCT room need jacks too. Wired connections are more reliable than Wi-Fi for imaging and practice software, so treat Wi-Fi as a convenience rather than the main connection. Our network cabling and Wi-Fi page explains how we approach this for clinics.

An equipment closet

Your network switch (the box that connects all the wired devices), firewall, internet modem and any server need a home. Ideally that is a small, ventilated, lockable closet, not a corner of the staff room or under the reception counter. Heat and dust shorten the life of this equipment, and a lock keeps it away from curious hands.

Power

Plan dedicated outlets for the equipment closet and a battery backup (often called a UPS, a box that keeps equipment running briefly during a power blip and lets it shut down safely).

Internet

Get a business-grade connection and think about a second, cheaper connection from a different provider as a fallback. If the main line goes down on a busy day, a backup line lets you keep checking in patients and submitting claims.

Which software and hardware does a new dental office need?

Practice management software

This is the system that runs your schedule, charts, billing and insurance claims. Common choices in Canada include ABELDent, Tracker, ClearDent, Dentrix, Eaglesoft, Open Dental, Curve Dental and Paradigm. Some run on a server in your office; others, like Curve Dental, are cloud-based and run in a web browser.

Whichever you choose, ask the vendor for their current hardware and operating system requirements before you buy computers. Their conversion or setup team will also want a timeline, especially if you are bringing patient records over from another practice.

A server, or not

If your software or imaging runs locally, you will likely need a server: one dependable computer in the closet that stores the database and images for everyone else. If everything is cloud-based, you may not need one, but you still need a solid network and reliable internet.

Computers

Plan for front desk computers, one in each operatory, one for the doctor's office, and possibly one in the consult room. Buy business-grade machines that meet your software and imaging requirements, running a supported version of Windows (Microsoft ended support for Windows 10 on October 14, 2025, so new machines should be on Windows 11). Matching models make support simpler.

Imaging

Sensors, intraoral cameras, pano and CBCT units from makers such as Dexis, Carestream, Planmeca, Vatech or Sirona each have their own software, drivers and network needs. These often need to link to your practice management software so images land in the right patient's chart. Leave time to install and test this in every operatory, because it is where opening-week surprises usually come from.

Phones, printers and the front desk

  • A phone system that suits a busy front desk, with hold, transfers and voicemail set up.
  • Printers, a document scanner and label printers if you use them.
  • Payment terminals, which usually come from your payment processor but still need network access.
  • Monitors positioned so patients can't read the screen from the counter.

How do you protect patient information from day one?

It is much easier to start secure than to fix things later. Before any patient records are entered:

  • Firewall: a business firewall between your network and the internet, set up properly rather than left on factory settings.
  • Endpoint protection: security software on every computer that watches for viruses and ransomware.
  • Individual logins: each staff member gets their own account, not one shared password.
  • Multi-factor authentication (MFA): a second step, like a code on your phone, for email and remote access.
  • Separate guest Wi-Fi: patient Wi-Fi kept apart from your clinic network.
  • Encryption: laptops and backup drives encrypted, so a lost device is far less of a problem.

These measures lower the risk of a break-in or data loss; no setup removes all risk.

In Ontario, dentists who hold patient health records have obligations under PHIPA (the provincial health privacy law), including protecting that information and notifying patients of certain privacy breaches. The Information and Privacy Commissioner of Ontario has guidance for health care practices, and your college or a lawyer can confirm what applies to your clinic.

What about backups?

Set up backups before day one, not after the first busy month. A common approach is the 3-2-1 rule: three copies of your data, on two different types of storage, with one copy kept offsite (for example, an encrypted copy in a Canadian cloud). Then test a restore, so you know the backup actually works. Our backup and disaster recovery page covers how we set this up.

A pre-opening IT checklist

  1. Choose your practice management and imaging software, and get their written hardware requirements.
  2. Mark data jacks, outlets and the equipment closet on the floor plan.
  3. Order business internet, plus a backup connection if you want one.
  4. Run and label network cabling before drywall closes.
  5. Install the firewall, network switch, Wi-Fi and battery backup.
  6. Set up the server or cloud accounts.
  7. Install computers, imaging software and drivers in every operatory.
  8. Set up phones, printers, scanners and payment terminals.
  9. Create individual staff accounts and turn on MFA.
  10. Configure backups and test a restore.
  11. Walk through every room: log in, take a test image, print, make a call.
  12. Write down your passwords, vendor contacts and who to call for help, and store them securely.

What mistakes do new clinics most often make?

  • Leaving IT until after construction, then running cables along walls.
  • Buying computers before checking the software and imaging requirements.
  • Using consumer routers and home-grade Wi-Fi.
  • Assuming the imaging vendor, software vendor and contractor will coordinate with each other. Often nobody owns the whole picture unless you name someone.
  • Skipping the backup until "things settle down".

If you are still deciding who should handle all this, our post on choosing an IT company for a new Toronto dental clinic covers what to ask.

How Starcomm can help

We have been supporting dental clinics in Mississauga, Toronto and across the GTA since 1999, and dental IT is our specialty. For a new clinic, we can plan the network with your contractor, run the cabling, set up the server or cloud systems, install operatory computers and imaging, and put security and backups in place before your first patient. We coordinate with your software and imaging vendors so you are not left in the middle.

After opening, our managed IT plan covers 24/7 monitoring, maintenance and unlimited remote support for a flat monthly fee, with onsite visits billed separately at a discounted hourly rate. You can learn more on our dental IT support page.

Opening soon, or just starting to plan? Call us at 905-816-9797 or contact us and we will walk through your floor plan with you.

Frequently asked questions

How far ahead of opening should a new dental office contact an IT company?

Ideally while the floor plan is still being finalized, before construction starts. That leaves time to plan cabling, the equipment closet and power, and to order internet service, which can take a while at a new address.

Does a new dental office still need a server?

It depends on your software. If your practice management or imaging software runs locally, you will usually need one; if everything is cloud-based, you may not, though you still need a reliable network and internet connection.

Can we use Wi-Fi instead of running cables to each operatory?

Wi-Fi is handy for tablets and laptops, but wired connections are more dependable for chairside computers and imaging. Running cables during construction is much simpler than adding them once walls are finished.

Who sets up the imaging equipment, the vendor or the IT company?

Usually both. The imaging vendor installs and calibrates the device, while your IT provider makes sure the computers, network and links to your practice management software are ready and working.

What should we test in the week before opening?

Log in at every computer, take a test image in each operatory, print, scan, make and receive calls, run a test payment and restore a file from backup. Catching problems then is far easier than on a full schedule.

← All posts