IT Planning Before Switching Dental Practice Software

By Starcomm Technologies ·

Before switching practice management software, a dental office should plan six things on the IT side. Check that your computers and server meet the new vendor's requirements. Take a full backup that you have tested. Then confirm that your X-ray and imaging software, printers and other devices will connect to the new system. Most of the problems we see during a switch come from these details, not from the software itself.

This applies whether you are moving between server-based systems, say from Tracker to ABELDent, or from a system in your office to a cloud product like Curve Dental. The vendor usually handles converting your data. The rest of the office usually falls to you and your IT company.

Why does switching practice software need IT planning?

Your practice management software (the program that runs your schedule, charts, billing and claims) touches almost everything in the clinic. It runs on your server or connects to the internet. It talks to your imaging software. It prints labels and receipts, and it sends insurance claims.

When you change it, each of those connections has to be checked again. A conversion can go well and still leave the front desk unable to print walkout statements, or leave an operatory where X-rays won't open from the chart. Planning ahead turns those surprises into items on a list.

Will your current computers and server run the new software?

Every vendor publishes system requirements: the minimum computer power, memory, storage and Windows version it supports. Ask the new vendor for the current list early, before you sign if you can, and compare it with what you have.

Things to look at:

  • Windows version. Microsoft ended support for Windows 10 on October 14, 2025. Many vendors only support current versions of Windows, so older workstations may need upgrading or replacing first.
  • The server. Server-based systems often have their own requirements for the server's operating system, memory and database. An older server that runs your current software fine may not suit the new one.
  • Workstation age. If several computers are near the end of their life anyway, it can make sense to replace them before the switch rather than right after it. Our post on how often to replace dental computers and servers can help you decide.

It is easier to do hardware upgrades a few weeks ahead than to mix them into conversion week.

Server-based or cloud: what changes on the IT side?

Moving to a cloud system changes what your office depends on.

If you are moving to the cloud

  • Your internet becomes essential. If the connection goes down, so does access to the schedule and charts. Check that your speed is enough. Our guide on how fast a dental office's internet needs to be covers this. A backup internet connection is also worth considering.
  • Logins matter more. Cloud software can be reached from anywhere. Strong passwords and multi-factor authentication (a second check, such as a code on your phone) make it much harder for someone else to get in.
  • Imaging may still be local. Many cloud systems still connect to imaging software running on a computer in your office, so you may still need a local machine to store those images.

If you are staying server-based

The server, its backups and its battery backup stay just as important as before. Check that the backup software knows about the new database, since a backup set up for your old system may not capture the new one.

How will your patient data get moved?

The new vendor normally runs the data conversion. They take a copy of your old database and translate it into the new format. Your IT side has a few jobs here:

  1. Take a full, tested backup before anything starts. "Tested" means you have restored files from it and checked they open. Our post on testing a dental office backup explains how.
  2. Give the conversion team safe access. If they need to connect remotely, use a secure remote tool and remove their access when the job is done.
  3. Ask what will and won't convert. Patient demographics, appointments and ledgers usually move. Clinical notes, perio charts, scanned documents and attached files can vary by product. Get the answer in writing.
  4. Plan a test conversion. Many vendors offer a trial run so you can check that balances, recall dates and charts look right before the real cutover.

Will your X-ray and imaging software still connect?

Your imaging program (Dexis, Carestream, Schick, Sidexis, Planmeca, Vatech and others) usually links to the practice software through a bridge. This is a small connector that opens the right patient's images from the chart.

Before switching, confirm:

  • That the new practice software has a bridge for your imaging program and the version you run.
  • Whether patient ID numbers will change in the conversion. If they do, existing images may need to be re-linked to the right patients.
  • Whether intraoral scanners and cameras (iTero, CEREC and similar) need new settings to work with the new system.

Test the bridge in at least one operatory before go-live, with a real patient record.

What about printers, scanners and other devices?

The small things cause the most front-desk frustration. Make a list of every device that works with your current software and check each one:

  • Label printers and receipt printers
  • Document scanners and ID card scanners
  • Signature pads and patient check-in tablets
  • Electronic insurance claims. Ask the new vendor how claims are sent and what setup that needs.
  • Links to patient texting, reminders or online booking services

Some devices need new drivers (the small programs that let a computer talk to a device). Others may not be supported at all and need replacing.

How should user accounts and privacy be handled?

A switch is a good time to tidy up who can see what. Set up a separate login for each person rather than shared accounts. Give each role only the access it needs, and remove accounts for people who have left.

You also need a plan for the old system. Ontario dental offices have record-keeping duties under PHIPA and their college's rules. Patient records generally need to stay accessible for a set period, even after you change systems. Before you shut anything down, confirm the details with the RCDSO, your lawyer or the Information and Privacy Commissioner of Ontario. Common approaches include:

  • Keeping the old software on one computer in read-only mode for lookups
  • Keeping a secured, backed-up copy of the old database
  • Securely wiping old drives when they are finally retired

IT checklist before switching practice management software

  1. Get the new vendor's system requirements and compare them with every workstation and the server.
  2. Upgrade or replace hardware and Windows a few weeks before the switch.
  3. For cloud systems, check internet speed and consider a backup connection.
  4. List every device and integration, and confirm support for each one.
  5. Confirm imaging bridges and test one operatory end to end.
  6. Take a full backup and test a restore before conversion.
  7. Ask in writing what data will and won't convert, and run a test conversion if offered.
  8. Set up individual user accounts and permissions in the new system.
  9. Update your backup routine to include the new database or cloud data export.
  10. Decide how the old data will stay accessible, and for how long.
  11. Pick a go-live date and agree who handles what: vendor, IT company and office.

When is the best time to go live?

Choose a quieter stretch, not the week before holidays or a busy recall period. Many offices convert over a weekend or a closed day so staff can start fresh.

Make sure your vendor and IT company both know the date ahead of time, and agree how each can be reached during the cutover. Plan for a lighter schedule for the first few days while staff learn the new screens.

How Starcomm can help

We have supported dental offices across Mississauga, Toronto and the GTA since 1999. We work with Dentrix, Eaglesoft, Tracker, ABELDent, ClearDent, Open Dental, Curve Dental and Paradigm, along with the imaging systems that connect to them. When a clinic switches software, we can:

  • Check your hardware against the new vendor's requirements
  • Take and test backups
  • Work alongside the vendor's conversion team
  • Set up bridges and devices
  • Plan how your old records stay accessible

You can learn more on our dental IT support page. If you are thinking about a switch, call us at 905-816-9797 or contact us and we will walk through your setup with you.

Frequently asked questions

Does the software vendor handle all the IT work during a switch?

Usually the vendor converts your data and trains your staff. Hardware upgrades, backups, imaging bridges, printers and network setup often fall to your office or your IT company, so it helps to agree on who does what before you start.

Can we keep using our old X-ray images after switching practice software?

In most cases, yes. Your imaging software usually stays the same and connects to the new system through a bridge. Confirm the bridge is supported, and check whether patient ID numbers change, since images may need re-linking.

Do we still need a server if we move to cloud dental software?

Not always for the practice software itself. But many clinics still need a local computer or server for imaging, scanned documents or other programs. Your IT company can review what still needs to run in the office.

How long should we keep access to our old practice management system?

Patient records generally need to stay accessible for a set period after you change systems. The exact rules depend on your college and privacy law. Check with the RCDSO or a lawyer, and keep a secured, backed-up copy of the old data until you are sure.

How far ahead should we start planning the IT side?

It is best to start as soon as you are seriously considering a new system, ideally before signing. That leaves time to replace hardware, test backups and check devices without rushing in the final weeks.

← All posts