Intraoral Scanner Won't Connect? What Usually Fixes It

By Starcomm Technologies ·

When an intraoral scanner won't connect, the cause is usually simple. It is most often the cable or USB port, a computer that went to sleep or updated overnight, a software or driver version that no longer matches, or an internet or login problem that stops scans from reaching the lab. Work out which kind of "won't connect" you have, then check power, cable, port, restart, software and network, in that order.

Below we explain each cause in plain terms, give you a checklist your team can follow, and help you decide whether to call the scanner company or your IT company.

What does "won't connect" mean in your office?

Staff use the same words for several different problems. Pinning down which one you have saves a lot of time:

  • The software says no scanner is detected. The computer can't see the scanner at all.
  • The scanner connects, then drops mid-scan. It works for a while, then freezes or disconnects.
  • The software won't open or won't log in. You see a licence, account or sign-in error.
  • Scans won't send to the lab or cloud portal. Scanning works, but the case is stuck uploading.
  • Scans don't show up in the patient's chart. The scan exists but isn't linked to your practice management or imaging software.

Each of these has different usual causes, so the fix depends on which one you are seeing.

Is your scanner a cart unit or does it plug into a computer?

Intraoral scanners come in two broad setups. Some, like iTero units, usually arrive as a cart with a built-in computer. Others, like many 3Shape TRIOS and Medit setups, plug into a laptop or an operatory PC that your office supplies or that came with the scanner.

If you have a cart unit, problems are more often about Wi-Fi, logins and uploads. If your scanner plugs into a computer, problems are more often about USB ports, drivers (the small programs that let Windows talk to a device), Windows updates and power settings.

Why won't the computer detect the scanner?

The cable or the port

Scanners move a lot of data, so most need a high-speed USB port, usually USB 3 or newer (often a blue port, though not always). Common problems:

  • The scanner was plugged into a slower port, a front-panel port or a USB hub instead of directly into the computer.
  • An extension cable was added that the scanner doesn't support.
  • The cable is pinched by the chair, a cabinet door or a cart wheel.

Power

Check that the scanner's power supply is plugged in and its lights look normal. A power bar that got switched off, or a battery backup unit that shut down, can look like a connection problem.

Sleep and power-saving settings

Windows can turn off USB ports to save power, and laptops do this more readily on battery. A scanner that worked in the morning and "disappeared" after lunch is often a power-saving setting. Your IT team can turn this off for the scanner's computer.

Updates

A Windows update, a graphics driver update or a scanner software update can leave versions that no longer match. If the problem started the morning after a restart, an update is a likely suspect. Avoid reinstalling or rolling back software yourself unless the vendor or your IT team guides you, because scanner software often needs specific versions.

Security software

Antivirus and endpoint protection (software that watches computers for threats) sometimes blocks part of the scanner software. Please don't turn your protection off to test this. Ask your IT provider to add proper exceptions instead.

Why does it connect, then drop mid-scan?

  • A loose or damaged cable that loses contact as the wand moves.
  • A computer below the vendor's recommended specifications, especially the graphics card or memory.
  • The scanner or computer getting hot in a closed cabinet.
  • For wireless scanners, a low battery, too much distance from the receiver, or interference in the operatory.

If other devices also lose Wi-Fi in that room, see our post on why Wi-Fi drops in some dental operatories.

Why won't scans upload to the lab or cloud?

Scanning can work perfectly while sending fails. Common causes:

  • The internet is down or slow. Check whether other computers can browse. Our guide on what to do when your dental office internet goes down covers the next steps.
  • The login expired or someone changed the account password, or a sign-in code is going to a former staff member's phone.
  • The firewall is blocking it. The firewall is the device that filters traffic in and out of your network. A recent change can stop uploads.
  • The computer's date and time are wrong. Secure connections can fail when the clock is off, which looks like a connection error.
  • The cart is on weak Wi-Fi. A wired connection, where practical, is often more dependable.

Why don't scans show up in the patient's chart?

Many offices link the scanner software to their practice management software, such as Dentrix, ABELDent or Tracker, or to imaging software like Dexis. This link is often called a bridge. It can break when either program updates, when the server's shared folder moves, or when the server is offline. If scans exist on the scanner computer but not in the chart, the bridge or the server connection is the place to look.

A checklist to try before you call

  1. Take a photo of the exact error message. It helps whoever you call.
  2. Save or finish anything you can in the scanner software.
  3. Close the scanner software fully.
  4. Unplug the scanner, wait a few seconds, and plug it back directly into the computer's high-speed port, not a hub.
  5. Check the scanner's power supply and indicator lights.
  6. Do a full restart of the computer, not just sleep or log off.
  7. Open the scanner software again and try to connect.
  8. If it still fails, try another high-speed port on the same computer.
  9. Ask the team whether anything updated, moved or changed recently.
  10. For upload problems, check the internet on another device and confirm the scanner account login still works.
  11. For wireless scanners, charge the battery and try again closer to the receiver.

If none of this works, stop and call for help rather than trying fixes at random.

Should you call the scanner company or your IT company?

As a rough guide:

  • Scanner vendor: physical damage to the wand or tips, calibration, licences and subscriptions, and which software versions are supported.
  • IT company: the computer, Windows, USB and power settings, the network and Wi-Fi, the firewall, the server and the bridge to your practice software.

Many problems sit in between, such as an update that broke a driver. An IT company that knows dental offices can work with the vendor on your behalf, so your front desk isn't stuck relaying messages.

How to make scanner problems less likely

  • Label the correct USB port and keep the scanner cable away from chair movement.
  • Keep the scanner computer at or above the vendor's recommended specifications.
  • Control updates on scanner computers so they are checked before being applied, rather than installing overnight without anyone knowing.
  • Turn off USB power-saving on scanner computers.
  • Use a wired connection for cart units where possible.
  • Set up security software exceptions properly, so protection stays on.
  • Write down the scanner software version, Windows version and who to call for support.

None of these removes every problem, but together they lower the chance of a scanner failing in the middle of a patient appointment. If you are adding a scanner or rearranging operatories, our post on who sets up dental imaging and intraoral cameras in Toronto covers what a good setup looks like.

How Starcomm can help

Starcomm Technologies has supported offices across Mississauga, Toronto and the GTA since 1999, and dental IT is our specialty. We work with the computers, networks and practice software around intraoral scanners and imaging systems, including iTero, CEREC, Dexis and Carestream, and practice software such as Dentrix, ABELDent and Tracker.

We can often find the cause over a secure remote session, and we come onsite across the GTA when the problem needs hands at the chair. Our live support hours are Monday to Friday, 8 am to 8 pm, and Saturday, 10 am to 4 pm, Eastern time, and we respond to support requests within 5 minutes or less. Learn more about our dental IT support, call us at 905-816-9797, or contact us.

Frequently asked questions

Can I plug my intraoral scanner into a USB hub?

It is usually better not to. Most scanners need a direct high-speed connection to the computer, and hubs or extension cables are a common reason a scanner drops or isn't detected. Check your scanner's documentation for what it supports.

Why did my scanner stop working after a computer update?

Scanner software often depends on specific versions of Windows, drivers and graphics software, so an update can leave pieces that no longer match. Your scanner vendor or IT provider can confirm which versions are supported and restore a working setup.

Is it safe to turn off antivirus to get the scanner working?

We don't recommend it, because it leaves the computer and patient information more exposed. The better fix is to have your IT provider add proper exceptions for the scanner software so protection stays on.

Can scanner problems be fixed remotely?

Many can, especially software, update, login, network and upload issues. Physical problems like a damaged cable, a faulty port or a broken wand need someone onsite or a repair from the scanner vendor.

What information should I have ready when I call for help?

A photo of the error message, the scanner make and model, which computer it plugs into, when it last worked, and anything that changed recently, such as an update or a moved cart. This helps narrow down the cause quickly.

← All posts